What Type of Bulb for a Turkish Lamp: Bases, Color and Heat

People search “what type of bulb for Turkish lamp” usually after the first bulb they tried came out too bright or too blue. The short answer: for most Turkish lamps, use a warm white LED between 2200K and 2700K, at low wattage, with the base that matches your socket.
We make handmade gourd lamps in Bodrum and get asked this often. We don’t sell bulbs or mosaic glass lamps, but mosaic lamp owners ask us too, so this covers both.
What type of bulb for Turkish lamp owners: the short answer
For a mosaic glass lamp, a gourd lamp or a hanging lamp from a Turkish bazaar, the bulb that works in nearly every case looks like this:
- Base: whatever the socket takes. Often E12 on mosaic lamps sold through US shops, E14 on lamps made for Turkey and Europe, and E26/E27 on larger pieces and our gourd lamps.
- Type: LED. No incandescent or halogen inside glass or gourd.
- Color: warm white, 2200K to 2700K.
- Output: low. For a gourd lamp, a 4 to 8 W LED, 40W-equivalent or lower.
No bulb turns a Turkish lamp into a reading light. A gourd lamp throws dots and shapes onto the walls, and a mosaic lamp throws colored light. Put a bright bulb in either and the pattern washes out while the room still isn’t lit well enough for a book. If you need task light, buy a task lamp and treat these as the mood layer.
Bulb base types found on Turkish lamps
The base is the one spec you can’t compromise on, because the wrong one won’t fit. The “E” stands for Edison screw, and the number is the thread diameter in millimeters.
| Base | Diameter | Where you find it | US availability |
|---|---|---|---|
| E12 (candelabra) | 12 mm | Many mosaic lamps sold through US shops; small chandelier globes | Easy; most hardware stores |
| E14 (small Edison screw) | 14 mm | Many mosaic lamps made for Turkey and Europe, including bazaar buys | Mostly online; less common on US shelves |
| E26 (US medium) | 26 mm | Larger lamps wired for the US market | Everywhere |
| E27 (European medium) | 27 mm | Larger Turkish-made pieces; our gourd lamps | Online; E26 bulbs fit in practice |
| G9 | Two loop pins, 9 mm apart | Some small fittings | Hardware stores and online |
E26 and E27 are generally cross-compatible in practice, and US E26 bulbs are what our US customers put in our lamps. E12 and E14 are not interchangeable. An E12 bulb won’t grip in an E14 socket, and an E14 bulb won’t thread into an E12 one. Adapters exist but add length, so the bulb may press against the top of a small globe. My view, and it is only a view: order the correct bulb online instead.
How to identify the base on your lamp
Unplug the lamp and let the old bulb cool. Then:
- Read the old bulb. The base is usually printed on the glass, the metal collar or the box.
- Read the socket. Many carry a stamp such as “E14 250V 2A” on the sleeve.
- Measure. Across the bulb thread: about 12 mm (just under half an inch) for E12, about 14 mm for E14, and 26 to 27 mm (roughly an inch) for E26/E27.
- Look for pins. No thread and two small wire loops that push straight in means G9.
While the bulb is out, check the width of the opening in the globe, since a bulb that fits the socket can still be too wide for a narrow glass neck. Also look for a maximum wattage label on the fitting, and stay under it.
Lumens, not watts
Watts measure the power a bulb draws. Lumens measure the light that comes out. LED boxes still print “40W equivalent”, but lumens are the number that describes brightness. Rough figures from typical LED packaging:
- 25W-equivalent: around 200 to 250 lumens
- 40W-equivalent: around 450 lumens
- 60W-equivalent: around 800 lumens
Our house recommendation for a gourd lamp is a 4 to 8 W LED at 40W-equivalent or lower. Check the lumens too, because some efficient 8 W bulbs are sold as 60W-equivalent, which is more than a gourd needs.
For a single mosaic globe on an E12 or E14 base, 25W-equivalent is often enough. Opinion: when someone says their mosaic lamp looks cheap, the bulb is usually too bright. Glare flattens the colors and shows every grout line.

Color temperature and what it does to glass and gourd
Color temperature is the K number on the box. Lower numbers look amber, higher numbers look white and then bluish.
| Color temperature | How it looks | Mosaic glass | Gourd lamp |
|---|---|---|---|
| 2200K | Deep amber, near candlelight | Reds and golds glow; blues turn darker | Natural shell looks honey-brown |
| 2700K | Standard warm white | Balanced; blues still read as blue | Our default; Natural and White both look right |
| 3000K | Soft white, a little crisper | Turquoise brightens; warm colors lose depth | Acceptable; White gourd looks paler |
| 4000K and up | Neutral to daylight | Reds look cold; feels like a shop display | Shell looks flat and grayish; we don’t recommend it |
If a mosaic lamp is mostly red and amber glass, 2200K flatters it. If it is mostly blue and turquoise, 2700K or 3000K keeps those colors from going murky. A CRI (color rendering index) of 90 or higher, if the box lists it, helps glass look like itself.
For gourd lamps, stay between 2200K and 2700K. The shell is a warm natural material under varnish, and cool light makes it look like plastic. Opinion: 2200K suits a Natural gourd best in the evening, and 2700K keeps a White gourd creamy instead of gray.
Clear filament bulb or frosted bulb
On a gourd lamp, this choice controls how sharp the projected pattern is. A clear filament LED makes light from thin strips inside clear glass, and a small light source throws crisp shadows. Through carved and drilled holes, that means sharp dots on the wall, which is the look most people buy a gourd lamp for.
A frosted bulb spreads light over its whole surface. That larger source softens the shadow edges, so the pattern turns into rounder, blurrier spots. Some people prefer that in a bedroom, where a crisp ceiling pattern can feel busy.
The catch with clear filament is glare. A bare filament seen straight through a hole can glint, which matters more on a lamp at seated eye height than on a pendant over a table.
Mosaic lamps differ because the glass does the work, not holes. A frosted bulb spreads color evenly and hides the hot spot behind pale glass, while clear filament adds a little sparkle. At low output, both are fine.
Heat: why incandescent and halogen don’t belong inside glass or gourd
An incandescent bulb turns most of its power into heat, and halogen runs hotter still. Inside a closed mosaic globe that heat has nowhere to go, and over the years it is hard on the adhesive and grout holding the glass.
A gourd shell is dried plant material with a varnish finish. A 4 to 8 W LED gets warm at its base but stays far cooler than a 40 W incandescent, so we tell every customer the same thing: no incandescent or halogen inside a gourd. And no bulb makes a gourd lamp suitable for a bathroom or other damp room.
G9 fittings were often designed around small halogen capsules that run very hot. Swap those for G9 LEDs, but check the length first, since some are longer than the capsule they replace.
Dimmable bulbs, dimmers and smart bulbs
Dimming takes two matching parts: a bulb marked dimmable, and a dimmer rated for LED loads. A non-dimmable LED on a dimmer tends to flicker or fail early, and old dimmers built for incandescent bulbs often flicker at the low end. For a plug-in lamp, an inline cord dimmer or a plug-in dimmer module avoids any work on house wiring.
Our gourd lamps have an on/off switch on the cable, so they are not dimmable as they arrive. Add a dimmable bulb and a compatible plug-in or inline dimmer and they are. Some mosaic lamps come with a cord dimmer already fitted; test it with a dimmable LED before trusting it.
Smart bulbs handle dimming from an app. They are easiest to find in E26/E27; E12 versions exist, while E14 ones are harder to find in the US. Their bodies are often bulkier, which matters in a small globe. Never run a smart bulb through a dimmer; leave the switch fully on and dim in the app. Opinion: tunable white between 2200K and 2700K is the useful feature, and colored modes on colored mosaic glass just look muddy.
Multi-globe chandeliers and total brightness
Turkish mosaic chandeliers often carry many small globes, each with its own E12 or E14 bulb, and brightness adds up. Seven globes at 40W-equivalent, around 450 lumens each, total roughly 3,150 lumens. That is a lot for a decorative fixture over a dining table.
Work backward: decide how bright the fixture should be, divide by the number of globes, and buy that bulb. For a chandelier that is mainly decoration, 25W-equivalent per globe is a sensible start. If you need working light, add a separate source.
Buy every bulb for one fixture at once, same brand and same color temperature, because a 2700K globe beside a 3000K globe is obvious. Mounting and cord length are covered in our guide to Turkish chandeliers and hanging lamps.
Voltage: a lamp bought in Turkey and used in the US
Turkey runs at 230 volts and the US at 120 volts. A lamp bought in a Turkish bazaar is normally wired for 220-240V with a European round-pin plug, which raises two separate questions.
The bulb question is simple: the bulb must match the voltage at your wall. In the US, buy bulbs rated for 120V, or LEDs marked for a universal range such as 100-240V. A 230V-only LED may flicker or not light on 120V, and a 120V bulb on 230V fails quickly and can be unsafe.
The wiring question is for a licensed electrician. A plug adapter changes the plug shape and nothing else. Whether the lamp’s socket and cord suit your local supply, and whether the plug should be replaced, needs someone qualified to inspect it in person.
Our own lamps are wired for the destination, with a US, EU, UK, AU or CA plug and 110-120V or 220-240V to match, so all you add is a local bulb. For the wider picture, see what is a Turkish lamp and our mosaic lamp buying guide.
Frequently asked questions
Can I use a US E26 bulb in an E27 socket?
Yes, in practice. US E26 bulbs screw into E27 sockets, and that is what our US customers use in our gourd lamps. The bulb still has to be rated for your local voltage.
Is 2700K or 3000K better for a mosaic lamp?
For mostly red and amber glass, 2700K or even 2200K looks richer. For mostly blue and turquoise glass, 3000K keeps the blues clean. For mixed colors, 2700K is the safe middle.
Can I use an Edison-style filament bulb in a gourd lamp?
Yes, if it is an LED filament bulb and not an old incandescent one. A clear filament gives the sharpest dotted pattern. Keep it warm white and 40W-equivalent or lower.
Why does my LED bulb flicker on a dimmer?
Usually the bulb is not marked dimmable, or the dimmer was built for incandescent bulbs. Pair a dimmable LED with a dimmer rated for LED loads.
Do your gourd lamps come with a bulb?
No. Our lamps ship without a bulb, and we don’t sell bulbs. Buy a warm white LED at 2200K to 2700K and 4 to 8 W, with an E26 base in the US or E27 elsewhere.
Where to go next
If you are still choosing the lamp itself, start with our gourd table lamp guide and the post on handmade gourd lamps, which cover the lamps in more depth than the bulb. Browse the gourd table lamps collection or the gourd chandeliers and pendant lights. Every lamp is $279 with free worldwide shipping. Because we can’t take returns, look at the photos and dimensions carefully before ordering, and budget for a bulb, since there isn’t one in the box.


